Yet another list of PIC macros. These are ones I use a lot that make RISC assembler a bit easier (rolls eyes).

I use these all the time in my code so if you take anything from this section, you'll probably need these too. They just add some nice functionality like compare and skips. Also emulates some later opcodes e.g MOVFF

; common macros
; a lot of these bring Z80-like "opcodes"
; which makes code much more readable (RISC opcodes can be horrible)
;
		NOLIST

; a two cycle NOP with only a single word		
NOOP	        MACRO	
		GOTO 	$+1
		ENDM
		
		
; compare register with value. trashes W, Zflag set if values are the same
CP		MACRO 	REGF,VAL
		MOVLW	VAL
		SUBWF	REGF,W
		ENDM


;set carry flag
SCF		MACRO
		BSF	STATUS,C
		ENDM

;clear carry flag
CCF		MACRO
 		BCF	STATUS,C
		ENDM


;set zero flag
SZF		MACRO
		BSF	STATUS,Z
		ENDM

;clear zero flag
CZF		MACRO
 		BCF	STATUS,Z
		ENDM


;move literal to file register - trashes W
MOVLF	MACRO 	LITERAL,REG
	    	MOVLW    LITERAL
	    	MOVWF    REG
	    ENDM


;move file to file - trashes W
MOVFF	MACRO	REGSRC,REGDEST
		MOVFW	REGSRC
		MOVWF	REGDEST
		ENDM


;bitwise shortcuts just a bit clearer than bcf & bsf
; set a pin Lo
LO		MACRO	REGX,BITY
		BCF	REGX,BITY
		ENDM

;set a pin Hi
HI		MACRO	REGX,BITY
		BSF	REGX,BITY
		ENDM


; pulse a pin, don't care how long, just want the edges
HIPULSE	MACRO	REGX,BITY
		BSF	REGX,BITY
		BCF	REGX,BITY
		ENDM

LOPULSE	MACRO	REGX,BITY
		BCF	REGX,BITY
		BSF	REGX,BITY
		ENDM


; program flow conditionals
; skip the next instruction on specific conditions

; bit in register
SKIPHI	MACRO	REGX,BITY
		BTFSS	REGX,BITY
		ENDM
		
SKIPLO	MACRO	REGX,BITY
		BTFSC	REGX,BITY
		ENDM

; zero condition
SKIPZ	MACRO
		BTFSS	STATUS,Z
		ENDM

SKIPNZ	MACRO
		BTFSC	STATUS,Z
		ENDM

; carry condition
SKIPC	MACRO
		BTFSS	STATUS,C
		ENDM

SKIPNC	MACRO
		BTFSC	STATUS,C
		ENDM

; jump on zero condition
JMPZ 	MACRO 	K
		BTFSC  STATUS,Z
		GOTO   K
		ENDM

JMPNZ 	MACRO 	K
		BTFSS  	STATUS,Z
		GOTO	K
		ENDM

; jump on carry condition
JMPC	MACRO 	K
		BTFSC  	STATUS,C
		GOTO   	K
		ENDM

JMPNC 	MACRO 	K
		BTFSS  	STATUS,C
		GOTO   	K
		ENDM

; call on zero condition
CALLZ 	MACRO 	K
		BTFSC 	STATUS,Z
		CALL  	K
		ENDM

CALLNZ 	MACRO 	K
		BTFSS 	STATUS,Z
		CALL  	K
		ENDM

; call on carry condition
CALLC 	MACRO 	K
		BTFSC 	STATUS,C
		CALL  	K
		ENDM

CALLNC 	MACRO 	K
		BTFSS 	STATUS,C
		CALL  	K
		ENDM

; return on zero condition
RETZ	MACRO
		BTFSC  	STATUS,Z
		RETURN
		ENDM

RETNZ	MACRO
		BTFSS  	STATUS,Z
		RETURN
		ENDM

; return on carry condition
RETC	MACRO
		BTFSC  	STATUS,C
		RETURN
		ENDM

RETNC	MACRO
		BTFSS  	STATUS,C
		RETURN
		ENDM


		LIST